Search results for " Sludge"
showing 10 items of 247 documents
Enhanced high-quality biomethane production from anaerobic digestion of primary sludge by corn stover biochar
2020
Abstract This study conducted batch and continuous tests to reveal the feasibility of corn stover biochar on improving anaerobic digestion of primary sludge (PS). Dosing biochar (1.82, 2.55 and 3.06 g/g Total Solids (TS)) in digester improved methane content increasing from 67.5% to 81.3–87.3% and enhanced methane production by 8.6–17.8%. Model analysis indicated that biochar accelerated PS hydrolysis and enhanced methane potential of PS. The mechanistic studies showed that biochar enhanced process stability provided by strong buffering capacity and alleviated NH3 inhibition. In continuous test over 116 days, the volatile solids (VS) destruction in the biochar-dosed digester increased by 14…
A plant-wide modelling comparison between membrane bioreactors and conventional activated sludge
2020
Abstract A comprehensive plant-wide mathematical modelling comparison between conventional activated sludge (CAS) and Membrane bioreactor (MBR) systems is presented. The main aim of this study is to highlight the key features of CAS and MBR in order to provide a guide for an effective plant operation. A scenario analysis was performed to investigate the influence on direct and indirect greenhouse gas (GHG) emissions and operating costs of (i) the composition of inflow wastewater (scenario 1), (ii) operating conditions (scenario 2) and (iii) oxygen transfer efficiency (scenario 3). Scenarios show higher indirect GHG emissions for MBR than CAS, which result is related to the higher energy con…
Combination of the OSA process with thermal treatment at moderate temperature for excess sludge minimization
2019
Abstract This study investigated the chance to couple the conventional Oxic Settling Anaerobic (OSA) process with a thermic treatment at moderate temperature (35 °C). The maximum excess sludge reduction rate (80%) was achieved when the plant was operated under 3 h of hydraulic retention time (HRT). Compared with the conventional OSA system, the thermic treatment enabled a further improvement in excess sludge minimization of 35%. The observed yield coefficient decreased from 0.25 gTSS gCOD−1 to 0.10 gTSS gCOD−1 when the temperature in the anaerobic reactor was increased to 35 °C, despite the lower HRT (3 h vs 6 h). Moreover, the thermic treatment enabled the decrease of filamentous bacteria,…
Assessment and characterization of the bacterial community structure in advanced activated sludge systems
2019
Abstract The present study is aimed to assess and characterize the structure of bacterial community in advanced activated sludge systems. In particular, activated sludge samples were collected from an Integrated Fixed-film Activated Sludge – Membrane Bioreactor pilot plant under a University of Cape Town configuration with in-series anaerobic (Noair)/anoxic (Anox)/aerobic (Oxy) reactors – and further analyzed. The achieved results – based on Next Generation Sequencing (NGS) of 16S rDNA amplicons – revealed that the bacterial biofilm (bf) communities on plastic carriers of Oxy and Anox reactors had a greater diversity compared to suspended (sp) bacterial flocs of Oxy, Anox and Noair. Indeed,…
Effect of complexing agents on phosphorus release from chemical-enhanced phosphorus removal sludge during anaerobic fermentation
2020
Phosphorus (P) release from sludge containing phosphate precipitates (FePs or AlPs) as well as the anaerobic performance with the addition of complexing agents (citric, tartaric and EDTA) during ambient anaerobic fermentation process were investigated. Results showed that citrate addition was the most effective method to enhance P release from inorganic phosphate by chelation and promote volatile fatty acids (VFAs) production simultaneously during anaerobic fermentation. Equimolar citrate addition with chemical precipitates was the optimal dosage. Microbial analysis revealed that EDTA has the strongest inhibitory effect on microbial activity and community structure, while citrate was more e…
Integrated Fixed Film Activated Sludge (IFAS) membrane BioReactor: The influence of the operational parameters
2020
Abstract The present paper investigated an Integrated Fixed Film Activated Sludge (IFAS) Membrane BioReactor (MBR) system monitored for 340 days. In particular, the short-term effects of some operational parameters variation was evaluated. Results showed a decrease of the removal rates under low C/N values. Respirometry results highlighted that activated sludge was more active in the organic carbon removal. Conversely, biofilm has a key role during nitrification. The major fouling mechanism was represented by the cake deposition (irreversible).
Removal of 2-butoxyethanol gaseous emissions by biotrickling filtration packed with polyurethane foam
2016
The removal of 2-butoxyethanol from gaseous emissions was studied using two biotrickling filters (BTF1 and BTF2) packed with polyurethane foam. Two different inoculum sources were used: a pure culture of Pseudomonas sp. BOE200 (BTF1) and activated sludge from a municipal wastewater treatment plant (BTF2). The bioreactors were operated at inlet loads (ILs) of 130 and 195 g m(-3) hour(-1) and at an empty bed residence time (EBRT) of 12.5s. Under an IL of ∼130 g m(-3) hour(-1), BTF1 presented higher elimination capacities (ECs) than BTF2, with average values of 106±7 and 68±8 g m(-3) hour(-1), respectively. However, differences in ECs between BTFs were decreased by reducing the irrigation inte…
Sewage sludge as cheap alternative to microalgae as feedstock of catalytic hydrothermal liquefaction processes
2019
Abstract Production of biocrude through hydrothermal liquefaction (HTL) of sewage sludge (SS) and Chlorella vulgaris was investigated. NiMo/Al2O3 (KF 851), CoMo/Al2O3 (KF 1022) and activated carbon felt, tested as catalysts at 598 K for 30 min, did not change the biocrude yield but significantly improved its quality. Quantitative sulfur removal and lower oxygen content were found in biocrude when KF 851 and KF 1022 were used with C. vulgaris. The same catalysts decreased O/C and S/C ratio of the biocrude from SS. The highest HHV (38.19 MJ/kg) and H/C ratio (1.65) and the lowest O/C (0.11) of the biocrude from SS were obtained with the cheaper activated carbon felt. A new product phase, prob…
Ashes from Sewage Sludge and Bottom Sediments as a Source of Bioavailable Phosphorus
2018
Phosphorus is an element necessary for the growth of plants. As phosphate rock gets depleted, it becomes an increasingly scarce resource. Therefore, it seems necessary to implement simple methods of cheap and effective phosphorus recovery from waste. The ashes of municipal sewage sludge and bottom sediments constitute particularly valuable sources of phosphorus. However, these materials usually carry significant amounts of pollutants, including heavy metals. Optimization of ash phosphorus sequential extraction methods from a thermal conversion of sewage sludge and bottom sediments allows to select an effective and simple technology of phosphorus recovery, while maintaining low heavy metal p…
Experimental Investigation into the Effect of Pyrolysis on Chemical Forms of Heavy Metals in Sewage Sludge Biochar (SSB), with Brief Ecological Risk …
2021
Experimental investigations were carried out to study the effect of pyrolysis temperature on the characteristics, structure and total heavy metal contents of sewage sludge biochar (SSB). The changes in chemical forms of the heavy metals (Zn, Cu, Cr, Ni, Pb and Cd) caused by pyrolysis were analyzed, and the potential ecological risk of heavy metals in biochar (SSB) was evaluated. The conversion of sewage sludge into biochar by pyrolysis reduced the H/C and O/C ratios considerably, resulting in stronger carbonization and a higher degree of aromatic condensation in biochar. Measurement results showed that the pH and specific surface area of biochar increased as the pyrolysis temperature increa…