Search results for "Fastener"
showing 8 items of 8 documents
Endoscopic treatment of recurrent sigmoid volvulus with colopexy assisted by T-fasteners and colostomy.
2016
Residual Stresses Induced by Cold Expansion of Adjacent and Cut-Out Holes
2012
Fatigue life of fastener holes can be enhanced via a cold-expansion process to introduce a compressive residual stress field around the hole edge and to reduce crack growth propagation. Considering that aerospace components contain multiple rows of holes, the present investigation focuses on the evaluation of the three-dimensional residual stress distribution in adjacent cold-expanded (CE) holes. The redistribution of residual stresses caused by a cut introduced between two adjacent holes was also investigated. Finite element (FE) analysis and experimental technique were used to assess the residual stress distribution in a 6082-T6 aluminum plate with two adjacent holes expanded sequentially…
Virtual prototyping of a new intramedullary nail for tibial fractures
2012
In this work a new distal interlocking system has been developed which is easy to use, allows a reduction of the operating time and consequently the exposure to radiations both for surgeon and patient. The main goal of this study has been the design of a new intramedullary nail for tibial fractures able to simplify and speed up the distal locking operation phases. After a preliminary stage during which several candidate concepts have been proposed and analysed, the best solution has been developed and deeply investigated. The new system, called “expansion nail”, has been firstly modelled by setting up a full parametric CAD model and, then, tested by running non linear FEM analyses to evalua…
Fatigue crack propagation from a cold-worked hole
2007
Abstract The cold expansion process is widely used to enhance the fatigue life of structures with fastener holes. Various studies assert that the cold expansion improves the fatigue strength of fastener holes; however, the improvement of fatigue life is difficult to quantify. Therefore, the influence on fatigue life of cold-worked process was studied by numerical and experimental tests. Then, a parametric study on material hardening behavior and Bauschinger’s parameter was performed for several loading conditions in order to determine their effect on crack growth propagation. The results of the numerical tests have exhibited a good prediction of the fatigue life of the component.
Experimental and numerical analysis of aluminum-aluminum bolted joints subject to an indentation process
2015
Abstract The increasing interest of the industry (especially automotive, aviation and marine) in the fastener joints (riveted, bolted, etc.) between metallic materials, has re-opened the study on the possibility to improve the performance of the drilled structure using plastic deformation processes. Indentation process, performed before the drilling operation, creates circumferential compression stresses around the hole which increase significantly the mechanical performance of the drilled structures. In this paper, static and the fatigue performances of aluminum–aluminum (AW 6082-T6) single-lap bolted joints are studied. In particular, the study compares the mechanical strength of only dri…
Displacement measurement through DIC and DSPI techniques in cold-expanded holes
2008
In this paper, the displacement field induced by the split-sleeve cold expansion of holes was measured using both digital image correlation (DIC) and digital speckle pattern interferometry (DSPI) techniques. Thus, the experimental results, which were evaluated on the inlet surface of a 6082-T6 aluminium plate, were compared with those from theoretical prediction. DIC provided accurate measurements up to the elastic-plastic boundary, whereas the DSPI technique highlighted the changes of displacement in the elastic domain. Prediction of the displacement based on the existing analytical model agreed with the experimental results achieved with both techniques. Possible explanations for the diff…
Finite-element simulation of residual stress induced by split-sleeve cold-expansion process of holes
2008
A three-dimensional finite-element simulation was conducted for a split-sleeve cold-expansion process in order to determine the residual stress field around an expanded hole. The commercial FEA software DEFORM-3D™, a Lagrangian implicit code designed for metal forming processes, was used to model the cold-expansion process of a fastener hole. The results show a through-thickness residual stress field in good agreement with the analytical solution developed by Guo. Moreover, the simulation has highlighted the effect of the split sleeve and the plate thickness on the residual stress field. © 2007 Elsevier B.V. All rights reserved.
Experimentelle Bestimmung der Gleitreibungskräfte beim Einschlagen von Oberschenkelmarknägeln
1990
No data have published concerning the procedure of driving in intramedullary nails. An extensive experimental device consisting of a contact-free distance measurement, a dynamograph connected to strain gages and an accelerometer now enabled this investigation. Among other things we determined the range of sliding friction for each stroke at different levels of nail-progression. Depending of the depth of nail-progression forces between 200 N und 400 N were measured. When the nail is stuck these values rise to over 1000 N. The sliding-process lasted between 10 ms and 20 ms. Knowledge of these data is of major importance for improvement of surgical technique and possible development of mechani…